Testing items:

Pilling performance, some parameters, some items, 65%/25% depression ratio, 75% compression permanent deformation, resilience, all items, fiber content, 65%/25% compression ratio, rebound rate, dimensional change rate after washing, bursting strength, all parameters, color fastness to saliva, process quality, instructions for use, color fastness to sweat, color fastness to friction, needle and metal residue, color fastness to soap washing, pH value, formaldehyde content, color fastness to water, pores, defects, metal residues, odor, pilling, smell, specifications, decomposable carcinogenic aromatic amine dyes, appearance quality, appearance quality, process quality, safety performance, combustion performance, phthalates, heavy metals, depression ratio, metal residues such as sewing needles and broken needles

Testing standards:

1. GB/T 10807-2006 Determination of hardness of soft foam polymer materials (depression method) Method B

2. FZ/T 62036-2017 Latex pillows and pads FZ/T 62036-2017

3. GB/T 6669-2008 Determination of compression set of soft foam polymer materials 7.2 Method A

4. FZ/T 62036-2017/6.1.6 Pilling performance

5. FZ/T 62036-2017 Latex pillows and pads

6. GB/T4802.1-2008 Textiles Determination of fabric pilling performance Part 1: Circular locus method

7. GB/T2910.1-2009 Textiles Quantitative chemical analysis Part 1 General test rules

8. FZ/T 62036-2017 Latex pillows and pads

9. GB/T 24121-2009 Metal residues such as sewing needles and broken needles

10. FZ/T 62036-2017/6.2 Appearance quality

11. GB/T 19976-2005 Textiles Determination of bursting strength Steel ball method

12. FZ/T62036-20176.2 Latex pillows and pads

13. FZ/T62036-2017 Latex pillows and pads

14. GB/T24121-2009 Textile products Detection method for broken needle residues

15. FZ/T 62036—2017 Latex pillows and pads

16. GB/T 4802.1-2008 Determination of fabric pilling properties Part 1: Circular trajectory method

17. GB/T 6670-2008 Soft foam polymer materials Determination of rebound performance by falling ball method Method A

18. FZ/T 62036-20176.2 Appearance quality, process quality

19. FZ/T62036-20176.1.4 Latex pillows and pads

20. GB/T 6670-2008 Determination of rebound properties of soft foam polymer materials by falling ball method GB/T 6670-2008

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms
 
3. Used as a sales report: issuing legally effective testing reports to make consumers more confident
 
4. Papers and research: Provide professional personalized testing needs
 
5. Judicial services: providing scientific, fair, and accurate testing data
 
6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems
 

100% inspection and testing process:

1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations
 
3. Mail samples and arrange testing
 
4. Progress tracking and result feedback
 
5. Provide reports and after-sales service
 
6. If urgent or priority processing is required
 

Testing and testing characteristics:

1.The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby
 
3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service
 
7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc
 
8. The testing report is authoritative and effective, and is generally used in China