Where is the testing of melt blown fiber mesh nonwoven adhesive lining done? The Baijia.net testing platform will develop a testing plan for melt blown fiber mesh nonwoven adhesive lining based on customer needs, conduct testing and analysis on designated items of samples according to relevant standards, and issue authoritative and effective testing reports for melt blown fiber mesh nonwoven adhesive lining

Testing standards:

FZ/T 64041-2014 melt blown fiber mesh non-woven adhesive lining

Scope of application:

This standard is applicable to identifying the quality of melt blown fiber mesh non-woven adhesive lining for clothing.

Reference standards:

GB/T4666 Textiles - Determination of length and width of fabrics

GB/T6284 General method for the determination of moisture in chemical products - Drying reduction method

GB/T8170 rounding rules and representation and determination of limit values

GB/T9345.1 Determination of plastic ash - Part 1: General method

GB/T9345.4 Determination of plastic ash - Part 4: Polyamide

GB/T16582 Capillary method and polarizing method for plastics

Microscopic Method for Determining the Melting Behavior of Partially Crystallized Polymers (Melting Temperature or Melting Range)

GB18401 National Technical Specification for Basic Safety of Textile Products

GB/T24218.1 Test Methods for Textile Nonwovens Part 1: Determination of Mass per Unit Area

GB/T24218.3 Test Methods for Textile Nonwovens Part 3: Determination of Breaking Strength and Elongation at Break (Strip Method)

GB/T28465 Inspection Rules for Clothing Interlining

FZ/T01074 Identification of Clothing Interlining Products

FZ/T01075 Inspection Method for Appearance Defects of Clothing Interlining

FZ/T01076 Method for Making Composite Specimens of Size Change of Hot Melt Bonded Interlining

FZ/T01083-2009 Test Method for Appearance and Size Change of Hot Melt Bonded Interlining After Dry Cleaning

FZ/T01084-2009 Test Method for Appearance and Size Change of Hot Melt Bonded Interlining After Water Cleaning

FZ/T01085-2009 Test Method for Peeling Strength of Composite Lining

FZ/T01110 Adhesive Lining Adhesion and Penetration Test Method after Pressing

HG/T3697-2002 Hot Melt Adhesive for Textiles

What is the cost of testing melt blown fiber mesh nonwoven adhesive linings

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China