Where is the hot air method used for testing non-woven fabrics? The BAIJIAN testing platform will develop a hot air non woven fabric testing plan based on customer needs, conduct testing and analysis on designated items of samples according to relevant standards, and issue authoritative and effective hot air non woven fabric testing reports

What is the cost of hot air testing for non-woven fabrics?

The cost of testing needs to be determined based on factors such as actual testing items, laboratory qualifications, and regions

Testing standards:

FZ/T 64046-2014 hot air non-woven fabric

Scope of application:

This standard specifies the terms and definitions, classification, requirements, testing methods, inspection rules, marking, packaging, transportation, and storage of hot air non-woven fabric.

This standard is applicable to nonwoven fabrics with a unit area mass of 15g/m2 to 100g/m2, which are mainly made of low melting point composite fibers and have been melted and consolidated by hot air

Reference standard:

GB/T250 Textiles - Grey sample card for evaluating color fastness

GB/T2912.1 Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method)

GB/T5009.78 Analysis Method for Hygienic Standard of Raw Paper for Food Packaging

GB/T7573 Textiles - Determination of pH Value of Water Extraction Solution

GB/T8170 Value Rounding Rules and Representation and Judgment of Limit Values

GB/T8424.2 Textile Color Fastness Test - Instrument Evaluation Method for Relative Whiteness

GB15979 Hygienic Standard for Disposable Sanitary Products

GB18401 National Basic Safety Technical Specification for Textile Products

GB/T24218.1 Spinning Testing methods for non-woven fabrics - Part 1: Determination of mass per unit area

GB/T24218.2 Testing methods for non-woven fabrics - Part 2: Determination of thickness

GB/T24218.3 Testing methods for non-woven fabrics - Part 3: Determination of breaking strength and elongation at break (strip method)

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China