Scope

This standard specifies the terms and definitions, requirements, test methods, inspection rules, packaging, and labeling of lining silk This standard is applicable to evaluating the quality of various types of clothing lining fabrics made of polyester, nylon, acetate, viscose, copper ammonia fiber filaments woven or interwoven with the above filaments

Normative references

The following documents are essential for the application of this document.

. For dated references, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document

GB/T 250 Textiles - Color Fastness Testing - Grey Sample Card for Evaluating Discoloration

GB/T 2910 (All Parts) - Quantitative Chemical Analysis of Textiles

GB/T 3917.2 Textiles - Tear Resistance of Crystal Fabrics - Part 2: Trouser shaped Specimens (Single Seam) Determination of Tear Strength

GB/T 3920 Textile Crystal Color Fastness Test - Color Fastness to Rubbing

GB/T 3921-2008 Textile Crystal Color Fastness Test - Color Fastness to Soap

GB/T 3922 Textile Crystal Color Fastness Test - Color Fastness to Sweat

GB/T 3923.1 Textiles - Part 1: Determination of Breaking Strength and Elongation at Break (Strip Method)

GB/T 4666 Textiles - Determination of length and width of fabrics

GB/T 4668-1995 Determination of density of woven fabrics

GB/T 4669-2008 Textiles - Determination of mass per unit length and mass per unit area of woven fabrics

GB/T 4841.3 Dye dyeing standard depth color card 2/1.1/3.1/6.1/12.1/2.1/25

GB/T 5711 Textiles - Color fastness test - Color fastness to washing with ethylene oxide

GB/T 8628 Textiles - Determination of dimensional changes - Test specimens and Preparation, Marking and Measurement of Clothing

GB/T 8629-2001 Household Washing and Drying Procedures for Textile Testing

GB/T 8630 Textiles - Determination of Dimensional Changes after Washing and Drying

GB/T 8631 Textile Crystal Fabrics - Determination of Dimensional Changes Caused by Cold Water Immersion

GB/T 13772.2 Textiles - Determination of Yarn Slip Resistance at Seams of Woven Fabrics - Part 2; Fixed Load Method

GB/T 14801 Test Methods for Weft Inclination and Bow Weft of Woven and Knitted Fabrics

GB/T 15552 Test Methods and Inspection Rules for Silk Fabrics

GB18401 National Basic Safety Technical Specification for Textile Products

GB/T 19981.2 Professional Maintenance of Textile Fabrics and Clothing Dry cleaning and wet cleaning - Part 2: Procedure for performance testing when using tetraethylene for washing and ironing

GB/T 29862 Identification of fiber content in textiles

GB/T 30557 Terminology of defects in silk woven fabrics

FZ/T 01057 (all parts) Textile fiber identification test method

FZ/T 20021 Test method for dimensional change of fabrics after steaming

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China