Testing scope: down sleeping bags, baby sleeping bags, inflatable sleeping bags, outdoor sleeping bags

Testing items: quality testing, insulation performance testing, fiber content testing, formaldehyde content testing, pH value testing, odor testing, air permeability testing, color fastness testing, fluffiness testing, factory testing, etc Testing standard: GB/T23158-2008 Safety requirements and testing for imported and exported sleeping bags for infants and young children ASTMF1853-2011 Test for measuring the volume of sleeping bags ASTMF1955-1999 (2005) Flammability test for sleeping bags BSEN13538-2-2002- Determination of dimensional characteristics of sleeping bags - Part 2: Determination of thickness and elastic recovery DINEN13538-1-2002- Dimensional characteristics of sleeping bags - Part 1: Internal dimensions DINEN13538-2-2002- Determination of dimensional characteristics of sleeping bags - Part 2: Thickness and elastic recovery MZ/T014.4-2010- Disaster relief bedding - Part 4: Multifunctional sleeping bags QB/T1195-2012 Down feather sleeping bags T/DTFZ007-2018 fiber sleeping bags - General use for household use In outdoor scenarios, it is necessary to pay attention to the quality of the sleeping bag when using it, in order to maintain its basic functions, such as warmth and sleep. At the same time, considering the material of the filling material, try to keep it dry and ventilated, and do not touch damp environments. FZ/T81001-2016 Pajama sets are suitable for indoor clothing such as pajamas (sets) produced using textile woven fabrics as the main raw material.

Numbering Item Note Color Requirements Sample Requirements 1 Fiber Content # 1 The name and content of each component fiber in the textile product, expressed as a percentage of the total fiber content in a certain part of the product. Any two cycles of 10 grams or more of formaldehyde in one color. Formaldehyde is a colorless gas with a pungent odor. Textiles containing formaldehyde will gradually release free formaldehyde during use, which can cause respiratory and skin inflammation through contact with the human respiratory tract and skin. It can also cause irritation to the eyes. The pH value of a 10g 3PH fabric with a uniform color refers to the residual acid and alkali content in the fabric. If various chemicals in textile printing and dyeing processing are not fully washed or neutralized, the acidity and alkalinity on the fabric are too high, exceeding the range of pH adaptation of the human skin, which can easily cause skin itching, allergies, inflammation and other diseases, and even damage the sweat glands and nervous system of the human body, affecting human health. If one or more odors, such as rain odor, high boiling range petroleum odor (such as gasoline or kerosene odor), fishy odor, or aromatic hydrocarbon odor, are detected in a 20 gram 4 color textile, it will be deemed as "odorous" and the odor category will be recorded. Any color of 30 cm * 30 cm can be decomposed into aromatic amine dyes. Decomposable aromatic amine dyes refer to dyes synthesized from carcinogenic aromatic amines, commonly known as "prohibited azo dyes". After decomposable aromatic amine dyes are made into clothes, they cannot be distinguished from the appearance of textiles and can only be detected through technical testing, and cannot be eliminated. This type of dye can cause various malignant diseases and absorb carcinogens when in contact with human skin. The degree of fading resistance to water immersion during use or processing of various types of textiles dyed or printed with a color fastness of 10 grams per square meter (excluding white). The degree of fading resistance to sweat during use or processing of various types of textiles dyed or printed with a color fastness of 30 centimeters * 30 centimeters per square meter (excluding white). The degree of fading caused by external friction during use or processing of various types of textiles with uniform color (excluding white) 30 cm * 30 cm 8 color fastness to rubbing, dyeing or printing. The degree of fading of various types of textiles dyed or printed with a color fastness of 30 cm * 30 cm (excluding white) to saliva immersion during use or processing. The degree of fading of various types of textiles dyed or printed with 30 cm * 30 cm 10 color fastness to soap washing, except for white, during use or processing. Color fastness to dry cleaning: The degree of fading of various types of textiles dyed or printed in a uniform color (excluding white) of 30cm * 30cm during use or processing. Homochromatic (except white) 30 cm * 30 cm 12 wash size change rate Water wash size change rate refers to the size change in the length and width direction of a textile after washing and drying, usually expressed as a percentage of the original size change. 3 finished products in any one color. After washing, the appearance of the finished product should not show any cracks, obvious distortion, deformation, or other appearance changes. The accessories should not deform, discolor, rust, or fall off. The physical indicator of the degree of adhesion between the adhesive lining and the clothing fabric after peeling off the strength of any 14 layer adhesive lining, expressed as the force required during the peeling process. 1-2 finished 15 fabric pilling fabrics of any color can cause pilling and pilling on the surface of the fabric due to the performance of the fabric itself and external friction during wear, forming a section of hair balls that are buried in the fibers of the fabric at one end and connected to the fabric surface at the other end. The hair balls are prone to dirt and dirt accumulation, which affects the aesthetics of the fabric. The phenomenon of pilling and pilling on the surface of fabrics can occur on both natural and chemical fiber fabrics, while wool textiles, synthetic fibers, and blended fabrics are more likely to occur. Any color of 40 cm * 40 cm 16 slip refers to the phenomenon of fabric yarn slipping in the warp or weft direction at the seam, causing the seam to detach due to external force stretching during use. 2-3 pieces of finished 17 pants with any color. The back crotch seam of the sample pants (with a seam in the middle) is stretched at a constant elongation rate perpendicular to the seam direction until the seam is damaged. Record the maximum force value that reaches the joint failure. The tearing strength of the adhesive lining area of any color and one finished product is 70 centimeters * 70 centimeters. The combustion performance refers to all physical and chemical changes that occur when a material burns or encounters fire. This performance is measured by the characteristics of the material surface, such as ignitability and flame propagation, heat generation, smoke generation, carbonization, weight loss, and the generation of toxic products. Any article with a color of 50 centimeters * 50 centimeters * 2 or more is a partial list. For more testing needs and details, please consult the online consultant of the free agency: 15201733840 (phone and WeChat), and conduct testing on the top 100 inspection websites. Issuing authoritative testing reports has legal effect

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China