Testing scope:

Applicable to various pillow and cushion products mainly made of textile fibers

Product requirements:

The quality of the product is pided into internal quality, appearance quality, process quality, etc The internal quality of the product includes fiber content deviation, fabric breaking strength, washing size change rate, dry cleaning size change rate, fabric pilling performance, and color fastness.

The appearance quality of the product includes specification size deviation rate, weft (flower) skewness, color pattern (difference), appearance points, pattern quality, sewing needle quality, shrinkage seam quality, and sewing quality.

Number

Project

Project Notes

1

Fiber Content # 1

The name and content of each component fiber in a textile product, expressed as a percentage of the total fiber content in a certain part of the product

2

Formaldehyde content

Formaldehyde is a colorless gas with a pungent odor.

. Textiles containing formaldehyde will gradually release free formaldehyde during use, which can cause respiratory and skin inflammation through contact with the human respiratory tract and skin. It can also cause irritation to the eyes

3

pH value

The pH value of textiles refers to the residual acid and alkali content in the fabric. If various chemicals in textile printing and dyeing processing are not fully washed or neutralized, the acidity and alkalinity on the fabric are too high, exceeding the range of pH adaptation of the human skin, which can easily cause skin itching, allergies, inflammation and other diseases, and even damage the sweat glands and nervous system of the human body, affecting human health

4

Decomposable aromatic amine dyes

If textiles are detected to have one or more of the odor of rain, high boiling range petroleum (such as gasoline, kerosene odor), fishy odor, or aromatic hydrocarbon odor, they are classified as "having an odor" and the odor category is recorded

5

Odor

Decomposable aromatic amine dyes refer to dyes synthesized from carcinogenic aromatic amines, commonly known as "prohibited azo dyes". After decomposable aromatic amine dyes are made into clothes, they cannot be distinguished from the appearance of textiles and can only be detected through technical testing, and cannot be eliminated. This type of dye can cause various malignant diseases and absorb carcinogens when in contact with human skin

6

Color Fastness to Friction

The degree of fading of various textiles dyed or printed under external friction during use or processing

7

Color Fastness to Sweat

The degree of fading of various textiles dyed or printed under sweat during use or processing.

8

Color Fastness to Water

The degree of fading of various textiles dyed or printed during use or processing under water washing.

9

Color Fastness to Light

The degree of fading of various textiles dyed or printed under light during use or processing.

10

Color Fastness to Soap # 2

The degree of fading of various textiles dyed or printed during use or processing under the action of soap washing.

11

Color Fastness to Dry Cleaning # 2

The degree of fading of various textiles dyed or printed during use or processing under dry cleaning.

12

Size change rate after washing # 2

refers to the size change in the length and width direction of a textile after washing and drying, usually expressed as a percentage of the original size change

13

Dry cleaning size change rate # 2

refers to the size change in the length and width direction of a textile after dry cleaning, usually expressed as a percentage of the original size change

14

Fabric Pilling Performance

During the wearing process, due to the performance of the fabric itself and external friction, the surface of the fabric fuzzs and pills, forming a section of hair balls that are buried in the fibers of the fabric at one end and connected to the fabric surface at the other end. The hair balls are prone to dirt and scale accumulation, which affects the aesthetics of the fabric. The phenomenon of pilling and pilling on the surface of fabrics can occur on both natural and chemical fiber fabrics, while wool textiles, synthetic fibers, and blended fabrics are more likely to occur

15

Fabric breaking strength

The maximum force recorded when the specimen is pulled apart during the tensile test under specified conditions.

The above article is a partial list. For more testing needs and details, please consult the online consultant of the free consulting agency: 15201733840 (phone and WeChat), and conduct testing on the top 100 inspection websites. Issuing authoritative testing reports has legal effect

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China