The key indicators of medical protective clothing testing are liquid barrier performance, mainly including indicators such as water resistance, moisture permeability, synthetic blood penetration resistance, and water level. Determination of breaking strength and elongation at break, filtration efficiency, flame retardant performance analysis, anti-static performance analysis, etc. 100% inspection testing can provide point-to-point testing of the above indicators, and testing plans can be developed based on customer needs

Medical protective clothing testing standard reference:

GB 19082-2009 Technical requirements for disposable medical protective clothing

EN 14126:2003/AC: 2004 Protective clothing - Performance requirements and test methods for anti infection protective clothing

EN 1149-1:2006 Characteristics of static electricity in protective clothing - Part 1: Test method for surface resistivity measurement

YY/T 1498-2016 Guidelines for the selection and evaluation of medical protective clothing

YY/T 1499-2016 Liquid barrier resistance of medical protective clothing

Water resistance of YY/T 1632-2018 medical protective clothing materials: Impact penetration testing method

Test items of medical protective clothing:

Liquid barrier performance

Breaking strength

Elongation at break

Filter efficiency

Flame retardant performance

Anti static performance

Residual amount of ethylene oxide

Fungi Total number of bacterial colonies

Total number of bacterial colonies

Sterility

Skin irritation

Test indicators:

1. GB 19082-2009 Technical requirements for medical disposable protective clothing

GB 19082-2009 Technical requirements for medical disposable protective clothing Appearance, structure 20 pieces of size and specification, resistant to water permeability, moisture permeability, synthetic blood penetration, surface moisture resistance, breaking strength, elongation, filtration efficiency, flame retardant performance, anti-static performance, electrostatic attenuation performance, microbial indicators (non sterile), residue mark and instructions for use, skin irritation

2 EN 14126:2003/AC: 2004 Protective clothing - Performance requirements and test methods for anti infective protective clothing

EN 14126:2003/AC: 2004 Protective clothing - Performance requirements and test methods for anti infective protective clothing - Wear resistance -10 pieces -2000 rpm tear strength band * - Project needs to be subcontracted. Tensile performance, flame resistance, flame resistance, seam strength, puncture resistance, synthetic blood penetration resistance. The supplier should provide information on liquid resistance, liquid repellency, resistance to blood vector pathogen penetration, flexibility, resistance to dry microorganisms, and resistance to wet microorganisms.

3 EN 1149-1:2006 Characteristics of Static Electricity in Protective Clothing - Part 1: Test Methods for Surface Resistivity Measurement

EN 1149-1:2006 Characteristics of Static Electricity in Protective Clothing - Part 1: Test Methods for Surface Resistivity Measurement - Resistivity: If aging cycle and cost are required for one piece, please calculate separately

The above article is a partial list. For more testing needs and details, please consult the online consultant of the free consulting agency: 152  0173  3840 (phone and WeChat), conducting testing on over a hundred inspection websites - issuing authoritative testing reports has legal effect

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

100% inspection and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China